はてなキーワード: RESOLUTIONとは


Terms of Use


These Terms of Use and End User License Agreement (collectively, the “Agreement”) together with all the documents referred to in it constitute a legally binding agreement made between you as a natural person (“you”, “your” or “user”) and We (“we,” “us” or “our”), concerning your access to and use of the software application for mobile devices (the “App”).

All the documents that relate to the App are hereby expressly incorporated herein by reference.

Please read this Agreement carefully before you download, install or use the App.

It is important that you read and understand this Agreement as by downloading, installing or using the App you indicate that you have read, understood, agreed and accepted the Agreement which takes effect on the date on which you download, install or use the App. By using the App you agree to abide by this Agreement.

If you do not agree with (do not accept) this Agreement, or if you do not agree at least with one of the provisions of this Agreement, you are not authorized to, and you may not access, download, install or use the App and you must ly discontinue downloading, installing the App and remove (delete) the App from any mobile device in your possession or under your control.


We reserve the right, at our sole discretion, to make changes or modifications to this Agreement at any time and for any reason. We will keep you informed about any changes by updating this Agreement and you waive any right to receive specific notice of each such change. It is your responsibility to periodically review this Agreement to stay informed of updates. You will be subject to, and will be deemed to be aware of and to have accepted, the changes in any revised Agreement by your continued use of the App after the date such revised Agreement is posted.


In order to download, install, access or use the App, you must (a) be eighteen (18) years of age or older.

All users who are minors in the jurisdiction in which they reside (generally under the age of 18) must have the permission of, and be directly supervised by, their parent or guardian to use the App, so if you are between the ages of thirteen (13) and seventeen (17) years and you wish to use download, install, access or use the App, before doing so you must: (a) assure and confirm (if needed) that your parent or guardian have read and agree (get your parent or guardian’s consent) to this Agreement prior to you using the App; (b) have the power to enter a binding contract with us and not be barred from doing so under any applicable laws.

Parents and guardians must directly supervise any use of the App by minors.

Any person under the age of thirteen (13) years is not permitted to download, install, access or use the App.

You affirm that you are either more than eighteen 18 years of age, or an emancipated minor, or possess legal parental or guardian consent, and are fully able and competent to enter into the terms, conditions, obligations, affirmations, representations, and warranties set forth in this Agreement, and to abide by and comply with this Agreement.


The App is a utility program designed to enhance your device experience. The App allows to scan any types of document to high quality PDF or JPEG; to save and store any scan copies of documents on your mobile devices; to share your scans via email; upload scanned documents to cloud services like box, Evernote or Google Drive (see the full performance list on the App’s page on itunes.apple.com). All documents shall be stored locally on your device and shall never be sent to any third-party unless you export them to other apps or devices by means of the App.

The App is intended only for your personal non-commercial use. You shall use the App only for the purposes, mentioned above.


Your privacy is very important to us. Accordingly, we have developed the Privacy Policy in order for you to understand how we process, use and store information including personal data. Access to the App and use of the Services is subject to the Privacy Policy. By accessing the App and by continuing to use the Services, you are deemed to have accepted the Privacy Policy, and in particular, you are deemed to have acknowledged the ways we process your information as well as appropriate legal grounds for processing described in the Privacy Policy. We reserve the right to amend the Privacy Policy from time to time. If you disagree with any part of the Privacy Policy, you must immediately stop using the App and Services. Please read our Privacy Policy carefully.


By using the App, you undertake to respect our intellectual rights (intellectual rights related to the App’s source code, UI/UX design, content material, copyright and trademarks, hereinafter referred to as the “Intellectual Property Rights”) as well as those owned by third parties.

As long as you keep using the App, we you a limited, non-exclusive, non-transferable non-sublicensable, non-assignable and revocable license to access and use the App pursuant to this Agreement on any Apple-branded products that you own or control except that the App may be accessed and used by other accounts associated with you via Family Sharing or volume purchasing (the “License”).

The source code, design and content, including information, photographs, illustrations, artwork and other graphic materials, sounds, music or video (hereinafter – the “works”) as well as names, logos and trademarks (hereinafter – “means of individualization”) within the App are protected by copyright laws and other relevant laws and/or international treaties, and belong to us and/or our partners and/or contracted third parties, as the case may be.

In the event of any third party claim that your possession and use of the App infringes that third party’s intellectual property rights, Apple will not be responsible for the investigation, defense, settlement and discharge of any such intellectual property infringement claim.

These works and means of individualization may not be copied, reproduced, retransmitted, distributed, disseminated, sold, published, broadcasted or circulated whether in whole or in part, unless expressly permitted by us and/or our partners and/or contracted third parties, as the case may be.

All rights, title and interest in and to the App and its content, works and means of individualization as well as its functionalities (1) are the exclusive property of We and/or our partners and/or contracted third parties, (2) are protected by the applicable international and national legal provisions, and (3) are under no circumstances transferred (assigned) to you in full or in part within the context of the license herewithin.

We will not hesitate to take legal action against any unauthorized use of our trademarks, names or symbols to protect and restore our rights. All rights not expressly ed herein are reserved. Other product and company names mentioned herein may also be the trademarks of their respective owners.


You agree not to use the App in any way that:

is unlawful, illegal or unauthorized;

is defamatory of any other person;

is obscene or offensive;

infringes any copyright, right or trademark of any other person;

advocates, promotes or assists any unlawful act such as (by way of example only) copyright infringement or computer misuse.

You shall not make the App available to any third parties. In addition, you shall not modify, translate into other languages, reverse engineer, decompile, disassemble or otherwise derivative works from the App or any documentation concerning the App.

You shall not transfer, lend, rent, lease, distribute the App, or use it for providing services to a third party, or any rights to the App or any documentation concerning the App to a third party.

Misuse of any trademarks or any other content displayed on the App is prohibited.

You shall not copy and/or duplicate and/or distribute and/or publish and/or use any content in the App, directly or indirectly, by way of a violation of our Intellectual Property Rights.

Moreover, you shall not make any attempts to use the App or part thereof for malicious intentions.

Also we are not responsible for the way you use the App.

It is clarified that we may adopt, against a user who violated the present Agreement, any legal measures at our disposal pursuant to the applicable laws.

All disputes arising from the usage of the App, shall be governed by and construed in accordance with the laws of the United States of America, and shall be submitted to the sole jurisdiction of the competent courts of New York, New York, the United States of America.


In order to use the App, you are required to have a compatible mobile phone or tablet, and internet access. However, please note that we offer you widgets that save translations and allow you to access them later in offline mode.

The App is available for downloading and installing on handheld compatible mobile devices running Apple iOS Operating System 11.0 with minimum system requirements.

We do not warrant that the App will be compatible with all hardware and software which you may use.

We make no warranty that your access to the App will be uninterrupted, timely or error-free. Neither does Apple have an obligation whatsoever to furnish any maintenance and support services with respect to the App.

You acknowledge the App is provided via the internet and mobile networks and so the quality and availability of the App may be affected by factors outside our reasonable control.

The version of the App may be upgraded from time to time to add support for new functions and services.

We may change or update the App and anything described in it without noticing you. If the need arises, we may suspend access to the App, or close it indefinitely.

You also warrant that any information that you submit to us is true, accurate and complete, and you agree to keep it actual at all times.

You can discontinue using our Services at any time by choosing the relevant option in your iTunes Account Settings. If you decide not to use the App for any reason you should uninstall the App.


The App is provided on a paid basis. You will need to pay a one-time fee of $14.99 in order to download the App. Once you download the App, you will get access to all its features.

Prices are in U.S. dollars, may vary in countries other than the U.S. and are subject to change without notice.

You may be charged by your communications service provider for downloading and/or accessing the App on your mobile phone or tablet device, so you should check the terms of agreement with your operator. This may include data roaming charges if you do this outside your home territory. All these charges are solely your responsibility. If you do not pay the bills related to your mobile phone or tablet device, then we assume that you have the permission from the person that does it before incurring any of these charges.


The App may link you to other sites on the Internet and contracted third parties to provide you certain services. We have no control over and accept no responsibility for the content of any website or mobile application to which a link from the App exists (unless we are the provider of those linked websites or mobile applications). Such linked websites and mobile applications are providedas is” for your convenience only with no warranty, express or implied, for the information provided within them.

You acknowledge that you must comply with applicable third party terms of agreement when using the App. You are solely responsible for and bear all risks arising from your use of any third-party websites or resources.

If you have any queries, concerns or complaints about such third party websites or mobile applications (including, but not limited to, queries, concerns or complaints relating to products, orders for products, faulty products and refunds) you must direct them to the operator of that third party website or mobile application.




NPM Dispute Resolutionのテキトー翻訳









このドキュメントは"npm行動規範(Code of Conduct)"で説明されている容認可能な行為明確化であり、このドキュメント記載されている内容はnpm行動規範のいかなる側面に対しても矛盾する解釈を与えるものではない。

  1. "npm owner ls <pkgname>"コマンドで作者のメールアドレスを調べる
  2. 作者にメールする。その際"support@npmjs.com"にもCcする
  3. 数週間すぎても解決しない場合、われわれが解決に乗り出す




  1. アリスがnodeに特化したわけではない"foo"というJavaScriptモジュールを書いていた。アリスはnodeを使っていなかった。ユースフは"foo"という名前をnodeで使おうと思い、それをnpmモジュールとして作成した。しばらくしてからアリスはnodeを使い始め、彼女プログラム管理権を守ろうとした。
  2. ユースフは"foo"というnpmモジュールを書いて公開した。おそらくだいぶ時間がたった後、アリスが"foo"にバグを見つけて修正した。彼女はユースフにプルリクを送ったがユースフはそれに時間を割く暇がなかった。なぜなら彼は新しい仕事と新しい子供を得、新しいErlangプロジェクトに集中しておりもはやnodeには関与していなかったからだ。アリスは新しい"foo"を公開したかったがその名前はすでに使われているためそれができない。
  3. ユースフ10行のフロー制御ライブラリを書き"foo"という名前でnpmで公開した。単純で小さなものなので、それはまったく更新する必要のないものであった。アリスは非常に高評価世界中販売されている"foo"という名前JavaScriptツールキットフレームワークメーカーであるFoo社で働いている。彼女らはそれをnpmで"foojs"として公開したが、"npm install foo"してナンカチガウと混乱する人が定期的に発生している。
  4. ユースフ業務上必要に迫られよく知られている"foo"というファイル形式のパーサを書いた。そして彼は新しい職を得てその試作品更新していない。アリスがより完璧な"foo"パーサを書いたがユースフの"foo"が邪魔をしてそれを公開できない。


  1. "npm owner ls foo"する。これによりアリスは所有者(ユースフ)のemailアドレスを知ることができる
  2. アリスはユースフメールして状況を『最大限丁寧に』説明し、モジュール名についてどうしたいのか伝える。彼女はそのメールCCにnpmサポートスタッフ(support@npmjs.com)を加える。またそのメールに"npm owner add alice foo"することにより、アリスを"foo"パッケージの所有者に加えることができることをユースフに伝える。
  3. 十分な時間の経過後、ユースフが返事をしなかったりユースフアリスの間で解決に至らなかった場合サポート(support@npmjs.com)にメールすれば我々が解決に乗り出す(「十分な」とは通常少なくとも4週間だ)。





  1. マルウェアインストールした機材の脆弱性を突いたり壊したりするために作られたパッケージ
  2. 著作権ライセンス違反(例えば、MITライセンスプログラムコピーして著作権及びライセンス記述を削除あるいは改変する)
  3. 違法コンテンツ
  4. 将来使おうとしているパッケージ名を「不法占拠」し実際には使わない。申し訳ないがその名前がいかに素晴らしいか、あるいはそれがいつの日か起こるであろう物事完璧フィットしているかどうかは関係ない。もし誰かがそれを今日使いたいと望み、あなたがそのスペースを空のtarball占領していたら、あなたは退去させられるだろう。
  5. パッケージレジストリに置く。パッケージはなんらかの機能を持たなければならない。それは馬鹿げたものであっても構わないが、無であってはならない(不法占拠を参照)
  6. レジストリ個人的アプリケーションデータベースとして使ったり、パッケージ的ではないものを置くなどの変な行為
  7. 下品言葉ポルノハラスメントなどのnpm行動規範で禁じられた行為





Copyright (C) npm, Inc., All rights reserved

ドキュメントは"Creative Commons Attribution-ShareAlike License."(https://creativecommons.org/licenses/by-sa/4.0/)の元で再利用可能。





























































フィールドプロット理想的構造を三幕構成によって説明する。三幕構成とはあらゆる物語はAct1, Act2, Act3の3つに分割可能だとする考え方である(その意味でいえばクーンツもまた「クーンツの三幕構成」というべき独自の三幕構成を定義しているというべきである)。これはパラダイムであり、ゆえに三幕構成は史上最高傑作にもメアリー・スーにも等しく存在する。





なお、MidPointは必ずしも派手なものである必要は無い。例えば映画マトリックス」におけるMidPointはネオ救世主ではないとオラクルに告げられる場面である。争いの無い静かな場面であり、生命の危機に直面しているわけではない。しか物語をこれまで動かしてきた大前提崩壊した瞬間である。MidPointはこのようにもはや後戻りができず、先の絶望的状況の回避方法が読者に容易に想像できない出来事であることが期待されているものであり、派手な出来事 このエントリーをはてなブックマークに追加ツイートシェア


今日は一日アニソン三昧Z で使われた曲が収録されているCDの一覧!

「今日は一日“アニソン”三昧 Z(ゼット)」でオンエアされた曲が収録されているCDの一覧です。





001. マジンガーZ(LIVE) / 水木一郎(「マジンガーZ」OP)

002. ボルテスVのうた / 堀江美都子、こおろぎ'73、コロムビアゆりかご会(「超電磁マシーン ボルテスV」OP)

003. 行くぞ! ゴーダム / 水木一郎、ヤング・フレッシュ(「ゴワッパー5 ゴーダム」OP)

004. LAST TRAIN -新しい朝- / knotlamp(「遊戯王5D's」OP)

005. 星のシルエット(和也のテーマ) / 芹澤廣明(「タッチ」挿入歌)

006. 愛がひとりぼっち / 岩崎良美(「タッチ」OP)

007. 風のメッセージ(達也のテーマ) / 芹澤廣明(「タッチ」挿入歌)

008. 10YEARS AFTER/米倉千尋(「OVA「機動戦士ガンダム 第08MS小隊」ED)


010. Resolution / ROMANTIC MODE(「機動新世紀ガンダムX」OP)

011. 君は僕に似ている / See-Saw(「機動戦士ガンダムSEED DESTINY」ED)

012. いくつもの愛をかさねて / 岩崎元是(「機動戦士Vガンダム」挿入歌)

013. 夢をかなえてドラえもん / mao コーラス:ひまわりキッズ(「ドラえもん」OP)

014. はじめてのチュウ / あんしんパパ(「キテレツ大百科」)

015. ムーンライト伝説 / DALI(「美少女戦士セーラームーン」OP)

016. 乙女のポリシー / 石田燿子(「美少女戦士セーラームーンR」ED)

017. タキシード・ミラージュ / 三石琴乃、久川綾、富沢美智恵、篠原恵美、深見梨加(「美少女戦士セーラームーンS」ED)

018. ひみつのアッコちゃん / 堀江美都子(「ひみつのアッコちゃん」OP)

019. 花の子ルンルン / 堀江美都子、ザ・チャープス(「花の子ルンルン」OP)

020. ラブ・ラブ・ミンキーモモ / 小山茉美(「魔法のプリンセス ミンキーモモ」OP)

021. デリケートに好きして / 太田貴子(「魔法の天使クリィミーマミ」OP)

022. Catch You Catch Me / グミ(「カードキャプターさくら」OP)

023. 狼少年ケン / 西六郷少年合唱団(「狼少年ケン」OP)

024. 黄金バット / ボーカル・ショップ(「黄金バット」OP)

025. スーパージェッター / 上高田少年合唱団、ナレーター:市川治(「未来から来た少年スーパージェッター」OP)

026. キューティーハニー / 前川陽子(「キューティーハニー」OP)

027. 魔法使いサリー / スリー・グレイセス(「魔法使いサリー」OP)

028. そばかすプッチー / フジ・ジュニア合唱団(「そばかすプッチー」OP)

029. 王者 侍ジャイアンツ / ロイヤルナイツ(「侍ジャイアンツ」OP)

030. ズッコのうた / 山田康雄、ヤング・フレッシュ(「アンデルセン物語」ED)

031. ぼくはカリメロ / 山崎リナ(「カリメロ」OP)

032. 異次元ストーリー / ポプラ(「夢戦士ウイングマン」OP)

033. 陽だまり / 村下孝蔵(「めぞん一刻」OP)

034. ニルスのふしぎな旅 / 加橋かつみ(「ニルスのふしぎな旅」OP)

035. 天才バカボン / アイドル・フォー(「天才バカボン」OP)

036. Happy Girl / 喜多村英梨(「パパのいうことを聞きなさい!」OP)

037. 君をのせて / 井上あずみ(「天空の城ラピュタ」挿入歌)

038. 花のささやき / 下成佐登子(「小公女セーラ」OP)

039. 裸足のフローネ / 潘恵子(「家族ロビンソン漂流記 ふしぎな島のフローネ」OP)

040. My Soul, Your Beats / Lia(「Angel Beats!」OP)

041. 鳥の詩(LIVE) / Lia

042. 時を刻む唄 / Lia(「CLANNAD AFTER STORY」OP)

043. ミラクル・ガール / 永井真理子(「YAWARA!」OP)

044. アタックNo.1 / 大杉久美子(「アタックNo.1」OP)

045. しゃにむにシェイクシェイク / SWITCH(「行け!稲中卓球部」OP)

046. キラキラ キセキ / REDIEAN;MODE(「ガンバリスト! 駿」OP)

047. 立ち上がリーヨ / T-Pistonz(「イナズマイレブン」OP)

048. DAN DAN 心魅かれてく / FIELD OF VIEW(「ドラゴンボールGT」OP)

049. 君に贈るララバイ / WELCOME(「特装機兵ドルバック」ED)

050. BON BON / Hey! Say! 7(「ラブ★コンED)

051. 君がいない未来 / Do As Infinity(「犬夜叉・完結編」OP)

052. Tattoo Kiss / r.o.r/s(「カレイドスター」)



055. 純潔パラドックス / 水樹奈々(「BLOOD-C」ED)

056. 逆光のフリューゲル / ツヴァイウィング《風鳴翼(CV:水樹奈々)、天羽奏(CV:高山みなみ)》(「戦姫絶唱シンフォギア」劇中歌)

057. Go!Go!MANIAC / 放課後ティータイム(平沢唯・秋山澪・田井中律・琴吹紬・中野梓(CV:豊崎愛生、日笠陽子、佐藤聡美、寿美菜子、竹達彩奈))(「けいおん!!」OP)

058. ごはんはおかず / 放課後ティータイム[平沢唯・秋山澪・田井中律・琴吹紬・中野梓(CV:豊崎愛生、日笠陽子、佐藤聡美、寿美菜子、竹達彩奈](「けいおん!」ED)

059. U&I / 放課後ティータイム(平沢唯・秋山澪・田井中律・琴吹紬・中野梓(CV:豊崎愛生、日笠陽子、佐藤聡美、寿美菜子、竹達彩奈(「けいおん!!」劇中歌)

060. Singing! / 放課後ティータイム(平沢唯・秋山澪・田井中律・琴吹紬・中野梓(CV:豊崎愛生、日笠陽子、佐藤聡美、寿美菜子、竹達彩奈))(映画「けいおん!!」ED)

061. ゲキテイ(檄!帝国華撃団) / 横山智佐(真宮寺さくら)+帝国歌劇団(「サクラ大戦」OP)

062. ウィーアー! / きただに ひろし(「ONE PIECE 」OP)

063. 勇者王誕生! / 遠藤正明(「勇者王ガオガイガー」OP)

064. エイトマン / 克美しげる(「エイトマン」OP)

065. 魔訶不思議アドベンチャー / 高橋洋樹(「ドラゴンボール」OP)

066. プラチナ / 坂本真綾(「カードキャプターさくら」OP)

067. DangDang気になる / 中村由真(「美味しんぼ」OP)

068. NIGHT OF SUMMERSIDE / 池田政典(「きまぐれオレンジロード」OP)

069. まっ白なリングへ / 堀欣也(「がんばれ元気」OP)

070. マクロス / 藤原誠(「超時空要塞マクロス」OP)

071. ランナー(リン・ミンメイver.) / 飯島真理(「超時空要塞マクロス」)


073. VOICES / 新居昭乃(「マクロスプラス」OP)

074. トライアングラー / 坂本真綾(「マクロスF」OP)

075. 娘々FINAL ATTACK フロンティア グレイテスト☆ヒッツ! / シェリル・ノーム starring May'nランカ・リー=中島愛(劇場版「マクロスF~サヨナラノツバサ」挿入歌)

076. oblivious / Kalafina(劇場版アニメ「空の境界 第一章 俯瞰風景」)

077. Magia / Kalafina(「魔法少女まどか☆マギカ」ED)

078. to the beginning / Kalafina(「Fate/Zero」OP)

079. カントリー・ロード / 本名陽子(映画「耳をすませば」主題歌)

080. Share The World / 東方神起(「ONE PIECE」ED)

081. ゆずれない願い / 田村直美(「魔法騎士(マジックナイト)レイアース」OP)

082. ポプラ通りの家 / ピーカブー(「キャプテン・フューチャー」ED)

083. 夢ノート / azusa(「もし高校野球の女子マネージャーがドラッカーの『マネジメント』を読んだら」OP)

084. ゲッターロボ! / ささきいさお(「ゲッターロボ!」OP)

085. 勇者ライディーン / 子門真人、コロムビアゆりかご会(「勇者ライディーン」OP)

086. コン・バトラーVのテーマ / 水木一郎、ザ・ブレッスン・フォー(「超電磁ロボ コン・バトラーV」OP)

087. ドリーム・シフト / SILK(「絶対無敵ライジンオー」OP)

088. Shangri-La / angela(「蒼穹のファフナー」OP)

089. KinKiのやる気まんまんソング / Kinki Kids(「ちびまる子ちゃん」OP)

090. 勇気100% / Sexy Zone(「忍たま乱太郎」OP)

091. Sunshine / MONKEY MAJIK(「ぬらりひょんの孫」OP)

092. コールドフィンガーガール / 栗山千明(「レベルE」OP)



095. 君が好きだと叫びたい / BAAD(「スラムダンク」OP)

096. 1/3の純情な感情 / SIAM SHADE(「るろうに剣心 -明治剣客浪漫譚-」ED)

097. YOU GET TO BURNING / 松澤由美(「機動戦艦ナデシコ」OP)

098. ギリギリchop / B'z(「名探偵コナン」OP)

099. コンディション・グリーン ~緊急発進~ / 笠原弘子(「機動警察パトレイバー」OP)

100. only my railgun / fripSide(「とある科学の超電磁砲」OP)


102. 猛烈宇宙交響曲・第七楽章「無限の愛」 / ももいろクローバーZ(「モーレツ宇宙海賊(モーレツパイレーツ)」OP)

103. われらの旅立ち / 水木一郎(「宇宙海賊キャプテンハーロック」ED)

104. サイボーグ009 / マイスタージンガー(「サイボーグ009」OP)

105. 疾風ザブングル / 串田アキラ(「戦闘メカ ザブングル」OP)

106. わが友マジンガーZ / 水木一郎(「マジンガーZ」挿入歌)

107. 空飛ぶマジンガーZ / 水木一郎、コロムビアゆりかご会(「マジンガーZ」挿入歌)

108. ルパン三世 愛のテーマ / 水木一郎(「ルパン三世」ED)

109. バビル2世 / 水木一郎、コロムビアゆりかご会(「バビル2世」OP)

110. ペガサス幻想(ファンタジー) / MAKE-UP(「聖闘士星矢」OP)

111. 晴れてハレルヤ / 奥井亜紀(「魔法陣グルグル」OP)

112. それでも明日はやってくる / 鈴木結女(「NINKU -忍空-」ED)

113. Butter-Fly / 和田光司(「デジモンアドベンチャー」OP)

114. 心絵 / ロードオブメジャー(「メジャー」OP)

115. Reckless fire / 井出泰彰(「スクライド」OP)

116. 燃えてヒーロー / 沖田浩之・小粥よう子(「キャプテン翼」OP)

117. ゆけゆけ飛雄馬 / アンサンブル・ボッカ(「巨人の星」OP)

118. がんばれドカベン / こおろぎ‘73(「ドカベン」OP)

119. 夢を勝ちとろう / 水木一郎、セリフ:頓宮恭子(「プロゴルファー猿」OP)

120. 翔べ!ガンダム / 池田鴻(「機動戦士ガンダム」OP)

121. 空色デイズ / 中川翔子(「天元突破グレンラガン」OP)

122. マジLOVE1000% / ST☆RISH(「うたの☆プリンスさまっ♪マジLOVE1000%」メインテーマ)

123. 星彩のRipieno / 佐咲紗花(「戦う司書 The Book of Bantorra」OP)

124. わぴこ元気予報! / 内田順子(「きんぎょ注意報!」OP)

125. もってけ!セーラーふく / 泉こなた(平野綾)、柊かがみ(加藤英美里)、柊つかさ(福原香織)、高良みゆき(遠藤綾)(「らき☆すた」OP)

126. Agape / メロキュア(「円盤皇女ワるきゅーレ」劇中歌)

127. 宇宙戦艦ヤマト / ささきいさお(「宇宙戦艦ヤマト」OP)

128. Alright!ハートキャッチプリキュア! / 池田彩(「ハートキャッチプリキュア!」OP)

129. サクラサク / 林原めぐみ(「ラブひな」OP)

130. ブルーウォーター / 森川美穂(「ふしぎの海のナディア」OP)

131. 輪舞-revolution / 奥井雅美(「少女革命ウテナ」OP)

132. 路地裏の宇宙少年 / ザ・コブラツイスターズ(「地球防衛企業ダイ・ガード」OP)

133. 覚醒ヒロイズム〜THE HERO WITHOUT A "NAME"〜 / アンティック-珈琲店-(「DARKER THAN BLACK -黒の契約者-」OP)

134. 緋色の空 / 川田まみ(「灼眼のシャナ」OP)

135. モノクロのキス / シド(「黒執事」OP)

136. ハレ晴レユカイ / 平野綾、茅原実里、後藤邑子(「涼宮ハルヒの憂鬱」ED)

137. COLORS / FLOW(「コードギアス 反逆のルルーシュ」OP)

138. コネクト / ClariS(「魔法少女まどか☆マギカ」OP)

139. Zzz / 佐咲紗花(「日常」ED)

140. 残酷な天使のテーゼ / 高橋洋子(「新世紀エヴァンゲリオン」OP) 

141. アンバランスなkissをして / 高橋ひろ(「幽☆遊☆白書」ED)

142. My Heart 言い出せない、Your Heart 確かめたい / GODDESS FAMILY CLUB (OVA版「ああっ女神さまっ」OP)

143. 恋愛サーキュレーション / 千石撫子(CV:花澤香菜)(「化物語」OP)

144. もどかしい世界の上で / 牧野由依(「N・H・Kにようこそ!」ED)

145. リトルグッバイ / ROCKY CHACK(「ゼーガペイン」ED)

146. 七転八起☆至上主義!/ KOTOKO(「ハヤテのごとく!」OP)


148. 君の知らない物語 / supercell(「化物語」テーマソング)

149. 裏切りの夕焼け / THEATRE BROOK(「デュラララ!!」OP)

150. おれはグレートマジンガー(LIVE) / 水木一郎(「グレートマジンガー」OP)

151. グランプリの鷹 / 水木一郎(「アローエンブレムグランプリの鷹」OP)

152. サバンナを越えて / 水木一郎(「ジャングル大帝」OP

153. ムーへ飛べ / 水木一郎(「ムーの白鯨」OP)

154. キャプテンハーロック / 水木一郎(「宇宙海賊キャプテンハーロック」OP)

155. oath sign / LiSA(「Fate/Zero」OP)

156. 不完全燃焼 / 石川智晶 (「神様ドォルズ」OP)

157. Break Out / JAM Project(「スーパーロボット大戦OG -ディバイン・ウォーズ-」OP)

158. 正解はひとつ!じゃない!! / シャーロック・シェリンフォード(CV:三森すずこ)、譲崎ネロ(CV:徳井青空)、エルキュール・バートン(CV:佐々木未来)、コーデリア・グラウカ(CV:橘田いずみ)(「探偵オペラ ミルキィホームズ」OP)

159. ゆりゆららららゆるゆり大事件 / 七森中☆ごらく部(赤座あかり(CV:三上枝織)歳納京子(CV:大坪由佳)船見結衣(CV:津田美波)吉川ちなつ(CV:大久保瑠美) (「ゆるゆり」OP) 

160. 侵略ノススメ☆ / ULTRA-PRISM with イカ娘(CV:金元寿子)(「侵略!イカ娘」OP)

161. キングゲイナー・オーバー! / 福山芳樹(「OVERMANキングゲイナー」OP)

162. ヴィーナスとジーザス / やくしまるえつこ(「荒川アンダー ザ ブリッジ」OP)

163. ハッピー☆マテリアル / 麻帆良学園女子中等部2-A「魔法先生ネギま!」

164. おしえて A to Z / 田村ゆかり(「B型H系」)

165. Morning Arch / 河野マリナ(「Aチャンネル」)





Types of digital cameras

Digital cameras are made in a wide range of sizes, prices and capabilities. The majority are camera phones, operated as a mobile application through the cellphone menu. Professional photographers and many amateurs use larger, more expensive digital single-lens reflex cameras (DSLR) for their greater versatility. Between these extremes lie digital compact cameras and bridge digital cameras that "bridge" the gap between amateur and professional cameras. Specialized cameras including multispectral imaging equipment and astrographs continue to serve the scientific, military, medical and other special purposes for which digital photography was invented.

[edit]Compact digital cameras

Subcompact with lens assembly retracted

Compact cameras are designed to be tiny and portable and are particularly suitable for casual and "snapshot" uses. Hence, they are also called point-and-shoot cameras. The smallest, generally less than 20 mm thick, are described as subcompacts or "ultra-compacts" and some are nearly credit card size.[2]

Most, apart from ruggedized or water-resistant models, incorporate a retractable lens assembly allowing a thin camera to have a moderately long focal length and thus fully exploit an image sensor larger than that on a camera phone, and a mechanized lens cap to cover the lens when retracted. The retracted and capped lens is protected from keys, coins and other hard objects, thus making it a thin, pocketable package. Subcompacts commonly have one lug and a short wrist strap which aids extraction from a pocket, while thicker compacts may have two lugs for attaching a neck strap.

Compact cameras are usually designed to be easy to use, sacrificing advanced features and picture quality for compactness and simplicity; images can usually only be stored using lossy compression (JPEG). Most have a built-in flash usually of low power, sufficient for nearby subjects. Live preview is almost always used to frame the photo. Most have limited motion picture capability. Compacts often have macro capability and zoom lenses but the zoom range is usually less than for bridge and DSLR cameras. Generally a contrast-detect autofocus system, using the image data from the live preview feed of the main imager, focuses the lens.

Typically, these cameras incorporate a nearly silent leaf shutter into their lenses.

For lower cost and smaller size, these cameras typically use image sensors with a diagonal of approximately 6 mm, corresponding to a crop factor around 6. This gives them weaker low-light performance, greater depth of field, generally closer focusing ability, and smaller components than cameras using larger sensors.

Starting in 2011, some compact digital cameras can take 3D still photos. These 3D compact stereo cameras can capture 3D panoramic photos for play back on a 3D TV.[3] Some of these are rugged and waterproof, and some have GPS, compass, barometer and altimeter. [4]

[edit]Bridge cameras

Sony DSC-H2

Main article: Bridge camera

Bridge are higher-end digital cameras that physically and ergonomically resemble DSLRs and share with them some advanced features, but share with compacts the use of a fixed lens and a small sensor. Like compacts, most use live preview to frame the image. Their autofocus uses the same contrast-detect mechanism, but many bridge cameras have a manual focus mode, in some cases using a separate focus ring, for greater control. They originally "bridged" the gap between affordable point-and-shoot cameras and the then unaffordable earlier digital SLRs.

Due to the combination of big physical size but a small sensor, many of these cameras have very highly specified lenses with large zoom range and fast aperture, partially compensating for the inability to change lenses. On some, the lens qualifies as superzoom. To compensate for the lesser sensitivity of their small sensors, these cameras almost always include an image stabilization system to enable longer handheld exposures.

These cameras are sometimes marketed as and confused with digital SLR cameras since the appearance is similar. Bridge cameras lack the reflex viewing system of DSLRs, are usually fitted with fixed (non-interchangeable) lenses (although some have a lens thread to attach accessory wide-angle or telephoto converters), and can usually take movies with sound. The scene is composed by viewing either the liquid crystal display or the electronic viewfinder (EVF). Most have a longer shutter lag than a true dSLR, but they are capable of good image quality (with sufficient light) while being more compact and lighter than DSLRs. High-end models of this type have comparable resolutions to low and mid-range DSLRs. Many of these cameras can store images in a Raw image format, or processed and JPEG compressed, or both. The majority have a built-in flash similar to those found in DSLRs.

In bright sun, the quality difference between a good compact camera and a digital SLR is minimal but bridgecams are more portable, cost less and have a similar zoom ability to dSLR. Thus a Bridge camera may better suit outdoor daytime activities, except when seeking professional-quality photos.[5]

In low light conditions and/or at ISO equivalents above 800, most bridge cameras (or megazooms) lack in image quality when compared to even entry level DSLRs. However, they do have one major advantage: their much larger depth of field due to the small sensor as compared to a DSLR, allowing larger apertures with shorter exposure times.

A 3D Photo Mode was introduced in 2011, whereby the camera automatically takes a second image from a slightly different perspective and provides a standard .MPO file for stereo display. [6]

[edit]Mirrorless interchangeable-lens camera

Main article: Mirrorless interchangeable-lens camera

In late 2008, a new type of camera emerged, combining the larger sensors and interchangeable lenses of DSLRs with the live-preview viewing system of compact cameras, either through an electronic viewfinder or on the rear LCD. These are simpler and more compact than DSLRs due to the removal of the mirror box, and typically emulate the handling and ergonomics of either DSLRs or compacts. The system is used by Micro Four Thirds, borrowing components from the Four Thirds DSLR system.

[edit]Digital single lens reflex cameras

Cutaway of an Olympus E-30 DSLR

Main article: Digital single-lens reflex camera

Digital single-lens reflex cameras (DSLRs) are digital cameras based on film single-lens reflex cameras (SLRs). They take their name from their unique viewing system, in which a mirror reflects light from the lens through a separate optical viewfinder. At the moment of exposure the mirror flips out of the way, making a distinctive "clack" sound and allowing light to fall on the imager.

Since no light reaches the imager during framing, autofocus is accomplished using specialized sensors in the mirror box itself. Most 21st century DSLRs also have a "live view" mode that emulates the live preview system of compact cameras, when selected.

These cameras have much larger sensors than the other types, typically 18 mm to 36 mm on the diagonal (crop factor 2, 1.6, or 1). This gives them superior low-light performance, less depth of field at a given aperture, and a larger size.

They make use of interchangeable lenses; each major DSLR manufacturer also sells a line of lenses specifically intended to be used on their cameras. This allows the user to select a lens designed for the application at hand: wide-angle, telephoto, low-light, etc. So each lens does not require its own shutter, DSLRs use a focal-plane shutter in front of the imager, behind the mirror.

[edit]Digital rangefinders

Main article: Rangefinder camera#Digital rangefinder

A rangefinder is a user-operated optical mechanism to measure subject distance once widely used on film cameras. Most digital cameras measure subject distance automatically using electro-optical techniques, but it is not customary to say that they have a rangefinder.

[edit]Line-scan camera systems

A line-scan camera is a camera device containing a line-scan image sensor chip, and a focusing mechanism. These cameras are almost solely used in industrial settings to capture an image of a constant stream of moving material. Unlike video cameras, line-scan cameras use a single row of pixel sensors, instead of a matrix of them. Data coming from the line-scan camera has a frequency, where the camera scans a line, waits, and repeats. The data coming from the line-scan camera is commonly processed by a computer, to collect the one-dimensional line data and to create a two-dimensional image. The collected two-dimensional image data is then processed by image-processing methods for industrial purposes.

Further information: Rotating line camera


Many devices include digital cameras built into or integrated into them. For example, mobile phones often include digital cameras; those that do are known as camera phones. Other small electronic devices (especially those used for communication) such as PDAs, laptops and BlackBerry devices often contain an integral digital camera, and most 21st century camcorders can also make still pictures.

Due to the limited storage capacity and general emphasis on convenience rather than image quality, almost all these integrated or converged devices store images in the lossy but compact JPEG file format.

Mobile phones incorporating digital cameras were introduced in Japan in 2001 by J-Phone. In 2003 camera phones outsold stand-alone digital cameras, and in 2006 they outsold all film-based cameras and digital cameras combined. These camera phones reached a billion devices sold in only five years, and by 2007 more than half of the installed base of all mobile phones were camera phones. Sales of separate cameras peaked in 2008. [7]

Integrated cameras tend to be at the very lowest end of the scale of digital cameras in technical specifications, such as resolution, optical quality, and ability to use accessories. With rapid development, however, the gap between mainstream compact digital cameras and camera phones is closing, and high-end camera phones are competitive with low-end stand-alone digital cameras of the same generation.


A Canon WP-1 waterproof 35 mm film camera

Waterproof digital cameras are digital cameras that can make pictures underwater. Waterproof housings have long been made but they cost almost as the cameras. Many waterproof digital cameras are shockproof and resistant to low temperatures; one of them is Canon PowerShot D10, one of the first underwater digital cameras.

These cameras become very popular during the holiday season, because many people want to save the best moments from their holidays at the seaside. Waterproof watches and mobile phones were produced earlier. Most makers of digital cameras also produce waterproof ones and every year they launch at least one new model, for example Sony, Olympus, Canon, Fuji.

Healthways Mako Shark, an early waterproof camera,[8] was launched in 1958 and cost around 25 dollars. It was a huge camera and pictures were black and white.






Portable electronic equipment battery technology

1, about the trickle charge, rapid charging and stable battery charging algorithm

According to the energy requirements of the final application, a battery may contain up to 4 lithium ion or lithium polymer battery core, its configuration will have a variety of change, at the same time with a mainstream power adapter: direct adapter, USB interface or car charger. Remove the core quantity, core configuration or power adapter type difference, the battery has the same charge characteristics. So they charge algorithm. Lithium ion and li-ion polymer battery best charging algorithm can divided into three phases: trickle charge, rapid charging and stable charge.

trickle charge. For depth discharge core to charge. When core voltage in less than about 2.8 V, use a constant 0.1 C of the current charging for it.

fast charging. Core voltage trickle charge more than the threshold, improve the charging current rapid charging. Fast charging current should be lower than 1.0 C.

stable voltage. In the fast charging process, once the core 4.2 V voltage, stable voltage phase began. This is through the minimum charge current or timer or of the two joint to interrupt charge. When the minimum current below about 0.07 C, can interrupt charge. The timer is to rely on a default to trigger the timer interrupt.

Advanced battery charger with additional security function normally. For example, if the core temperature exceeds the given window, usually 0 ℃-45 ℃, charge will be suspended.

Remove some very low-end equipment, now on the market/li-ion polymer lithium ion battery solutions are integrated with the outer components or, in accordance with the characteristics of the charging to charge, this is not just to get better effect charge, but also for safety.

lithium ion/polymer battery charge is an example of applications-double input 1.2 A lithium battery charger LTC4097

LTC4097 can be used to exchange adapter or USB power supply for single quarter/polymer lithium ion battery. Figure 1 for double input 1.2 A lithium battery charger LTC4097 schemes. It USES constant current/constant voltage algorithm charging, from exchange adapter power charge, programmable filling up to 1.2 electric current A, and with USB power can be as high as 1 A, at the same time, automatic detection in each input voltage whether there. This device also provide USB the current limit. Applications include PDA, MP3 players, digital camera, light portable medical and test equipment and big color cellular phone. The performance characteristics: no external micro controller charging termination; The input power automatic detection and choice; Through the resistance from the exchange of charging adapter input can be as high as 1.2 A programming charge current; The resistance of programmable USB charging current is up to 1 A; 100% or 20% USB charging current set; The input power output and existing bias NTC (VNTC) pin as a 120 mA drive ability; NTC thermistors input (NTC) pin for temperature qualified charged; Pre-settings battery voltage with floating plus or minus 0.6% accuracy; Thermal regulation maximize charge rate and free hot air LTC4097 can be used to exchange adapter or USB power supply for single quarter/polymer lithium ion battery. The use of constant current/constant voltage algorithm charging, from exchange adapter power charge, programmable filling up to 1.2 electric current A, and with USB power can be as high as 1 A, at the same time, automatic detection in each input voltage whether there. This device also provide USB the current limit. Applications include PDA, MP3 players, digital camera, light portable medical and test equipment and big color cellular phone.

2, lithium ion/polymer battery scheme

Lithium ion/polymer battery charge scheme for different number of core, core configuration, and power types are different. At present mainly have three main charging scheme: linear, Buck (step-down) switch and SEPIC (booster and step-down) switch.

2.1 linear scheme

When the input voltage in big with the charger with sufficient clearance of core after opening voltage, it is linear scheme, especially 1.0 C fast charging current than 1 A big too much. For example, MP3 players usually only one core, capacity from 700 to 1500 mAh differ, full charge voltage is open 4.2 V. MP3 player power is usually the AC/DC adapter or USB interface, the output is the rule of 5 V; At this time, the linear scheme is the most simple, most charger of the efficiency of the scheme. Figure 2 shows for lithium ion/polymer battery solution linear scheme, basic structure and linear voltage neat device.

linear scheme charger application examples-double input Li + charger and intelligent power source selector MAX8677A

MAX8677A is double input USB/AC adapter linear charger, built-in Smart Power Selector, used for rechargeable single quarter by Li + batteries portable devices. The charger integration of the battery and the external power source and load switch charging all the power switch, so that no external MOSFET. MAX8677A ideal used in portable devices, such as smart phones, PDA, portable media players, GPS navigation equipment, digital camera, and digital cameras.

MAX8677A can work in independent USB and the power input AC adapter or two input either one of the input. When connecting external power supply, intelligent power source selector allows the system not connect battery or can and depth discharge battery connection. Intelligent power source selector will automatically switch to the battery system load, use the system did not use the input power supply parts for battery, make full use of limited USB and adapter power supply input. All the needed electric current detection circuit, including the integration of the power switch, all integration in the piece. DC input current highest limit can be adjusted to 2 A and DC and USB input all can support 100 mA, 500 mA, and USB hung mode. Charge current can be adjusted to as high as 1.5 A, thus support wide range of battery capacitive. Other features include MAX8677A thermal regulation, over-voltage protection, charging status and fault output, power supply good surveillance, battery thermistors surveillance, and charging timer. MAX8677A using save a space, hot enhanced, 4 mm x 4 mm, 24 of the pins TQFN encapsulation, regulations, work in exceptional temperature range (40 ~ + 85 ℃).

2.2 Buck (step-down) switch scheme

When A 1.0 C of the charging current more than 1 A, or the input voltage of the core than with high voltage open many, Buck or step-down plan is A better choice. For example, based on the hard drive in the PMP, often use single core lithium ion battery, the full of open is 4.2 V voltage, capacity from 1200 to 2400 mAh range. And now PMP is usually use the car kit to charge, its output voltage in a 9 V to 16 between V. In the input voltage and battery voltage is the voltage difference between high (minimum 4.8 V) will make linear scheme lowers efficiency. This kind of low efficiency, plus more than 1.2 A 1 C fast charging electric current, have serious heat dissipation problems. To avoid this kind of situation, will the Buck scheme. Figure 3 for lithium ion/polymer battery charger scheme Buck diagram, basic structure with Buck (step-down) switching voltage regulators completely the same.

2.3 SEPIC (booster and step-down) switch scheme

In some use of three or four lithium ion/polymer core series equipments, charger of the input voltage is not always greater than the battery voltage. For example, laptop computers use 3 core lithium ion battery, full charge voltage is open 12.6 V (4.2 V x3), capacity is 1800 mAh to 3600 mAh from. Power supply input or output voltage is 1 6 V AC/DC adapter, or is car kit, the output voltage in a 9 V to 16 between V. Apparently, the linear and Buck solutions are not for this group of batteries. This is about to use SEPIC scheme, it can in the output voltage is higher than when the battery voltage, can be in the output voltage less than when the battery.

3, and power detection algorithm is proposed

Many portable products use voltage measurements to estimate the remaining battery power, but the battery voltage and surplus power relationship but will with the discharge rate, temperature and battery aging degree of change, make this kind of method can top 50% margin of error. The market for longer to use product demand unceasingly strengthens, so the system design personnel need more accurate solution. Use capacity check plan come to measure battery or consumption of electricity, will be in a wide range of application power to provide more accurate estimate of the battery power.

3.1 power detection algorithm is one of the examples of application, function complete list, double the battery portable battery application design

power detection principle. Good capacity check plan at least to have battery voltage, temperature and battery electric current, measuring method; A micro 9 a; And a set of and the verification of the punishment power detection algorithm is proposed. Bq2650x and bq27x00 is full capacity check program function, with a measuring voltage and temperature of the digital converter (ADC) and a measuring electric current and charging sensor the asp. These capacity check plan also has a microprocessor, is responsible for the implementation of the Texas instruments power detection algorithm is proposed. The algorithm can compensate the lithium ion battery life.low self-discharge, aging, the temperature and discharge rate, and other factors. Chip embedded microprocessor as host system processor save these calculation burden. Capacity check program can provide remaining power state information, bq27x00 series products also offer surplus can Run Time (Run Time to Empty) host may at any Time to capacity check plan these information query, then LED indicator light through or displays will inform the user battery. Capacity check meter is very easy to use, the system processor need only configuration 12 C or HDQ communication drive can.

The battery circuit description. Figure 4 (a) can be used for identification of IC functions with typical application circuit batteries. According to the use of IC testing program is different, the battery needs to have at least three to four outside the terminal.

VCC and BAT pins will even to the battery voltage, so that for, C power and the battery voltage measurement. The battery is connected a grounding resistance smaller detection resistors, let capacity check meter high impedance SRP and SRN input can monitor sensor resistance on both ends of the voltage. Through testing the current flows through a resistor can be used to judge the battery or release the amount of electricity. Designers choose detection resistance value must be considered when resistance on both ends of the voltage can't more than 100 mV, low resistance may be more hours in current errors. Circuit board layout must ensure that SRP and SRN to testing from as close as possible to the connection of the resistor sensor resistance end; In other words, they should be the Kelvin attachment.

HDQ pin need external and resistors, this resistance should be located the host or the main application, such capacity check plan to the battery and portable devices when sleep function enable connection broken. Advice and resistance choose 10 k Ω.

battery identification. A low cost WeiMao batteries are getting more and more serious, these cells may not contain OEM requirements of security protection circuit. So, genuine battery may contain figure 4 (a) shows the appraisal circuit. When to identify the battery, the host to contain IC (bq26150, the function is cyclic redundancy check (CRC)) issued the battery packs a ask value (challenge), the CRC will contain battery according to this inquiry value and, in the building of the IC in CRC polynomial calculation the CRC value. CRC is based on the host of command and IC secret in the query of the definition of the CRC polynomial completed, the host in CRC values calculated with the calculation result of well battery comparison to identify the appraisal success.

Once the battery through the appraisal, bq26150 will issue commands to ensure that the host and quantity test plan of material lines between normal communication. When the battery connection interruption or to connect, the whole the identification process will be repeated again.

double the battery application. Figure 4 (b) for use bq26500 support double the typical application of lithium ion battery circuit. In order to support more battery, and this circuit is adding a adjustable regulators. Capacity check millions of BAT pin and the bottom of a battery anode linked to complete the variable voltage measurement of the battery.

Host to be able to read capacity check plan of variable voltage measurement battery, to make sure the end of discharging threshold and charging terminate threshold. As for the remaining state power (RemainingStateofCapacity), do not need to read can use directly.

The above bq2650x and bq27x00 etc capacity check plan provides the battery manufacturer a simple to use options, this scheme L [just measuring battery voltage to be precise, so these capacity check plan can be applied to various battery framework, and can support the battery identification and double the battery application '

3.2 power detection algorithm is an example of applications another, can apply to all kinds of general voltmeter new IC.

Today's many manufacturers can provide a variety of voltmeter IC,, the user can choose the suitable function device, to optimize the product price. Use voltmeter measurement of storage battery parameters, the separate architecture allows users in the host custom power measurement algorithm within. Eliminating embedded processor battery cost. On this to Dallase semicconductor company called cases of DS2762 chip for typical analysis. A new separate voltmeter IC, its structure see chart 5 (a) below.

DS2762 application characteristics

DS2762 is a single quarter of lithium battery voltmeter and protection circuit, integrated into a tiny 2.46 mm x 2.74 mm inversion of packaging. Due to internal integration for power detection of high precise resistance, this device is very save a space. It is the small size and incomparable high level of integration, for mobile phone battery and other similar handheld products, such as PDA, etc, are all very ideal. Integrated protection circuit continuously monitoring the battery voltage, over voltage and flow fault (charging or discharge period). Different from the independent protection IC, DS2762 allow main processor surveillance/control protection FET conduction state, such, can DS2762 through the protection of the power system and the control circuit implementation. DS2762 can also charge a battery consumption has depth, when the battery voltage within three V, provide a limit of the charging current recovery path.

DS2762 accurate monitoring battery current, voltage and temperature, the dynamic range and resolution of common satisfy any mobile communication product testing standards. The measurement of current for internally generated when the integral, realize the power measurement. Through the real-time, continuous automatic disorders correct, the precision of power measurement can be increased. The built-in measuring resistance due to eliminate manufacturing process and temperature and cause resistance change, further improve the precision of the voltmeter. Important data stored in 32 bytes, can add the lock EEPROM; 16 bytes of SRAM are used to keep dynamic data. And DS2762 all communication all through the 1-Wire, more communication interface node, minimize the battery and the connection to the host. Its main features for; Single quarter of lithium battery protector; High precision current (power measurement), voltage and temperature measurement; Optional integrated 25 m Ω measuring resistance, each DS2762 after fine-tuning alone; 0 V battery restore charge; 32 bytes can lock EEPROM, 16 bytes SRAM, 64 a ROM;

1-Wire, node, digital communication interface; Support more battery power management, and through the protection system control FET power; Dormancy mode power supply current only 2 µ A (most); Work mode power supply current for 90 µ A (most); 2.46 mm x 2.74 mm inversion of packaging or 16 feet SSOP package led, and both are can choose with or without detection resistance; After has with e






























アーカイブ ヘルプ
ログイン ユーザー登録
ようこそ ゲスト さん